Frequency spectra of the sources 3C 295 and 3C 380

Interferometric flux density measurements on stellar light source

Error exponents for multipath fading channels : a strong coding theorem

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2002.Includes bibliographical references (leaves 43-45).This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.We derive upper and lower bounds on the probability of error (the exponents of which are the error exponents) with "peaky" signaling -- the signaling strategy that achieves the capacity of the multipath fading channel under an average power constraint in the limit of infinite bandwidth. These bounds constitute a strong coding theorem for the channel as they not only delimit the range of achievable rates, but also give us a relationship among the error probability, data rate, bandwidth, "peakiness", and fading parameters such as the coherence time. They can be used to compare peaky signaling to other large bandwidth systems over fading channels, such as ultrawide band (UWB) radio and wideband CDMA. We first derive an upper bound for general fading, then specialize to the case of Rayleigh fading where we obtain upper and lower bounds that are exponentially tight and therefore yield the reliability function. We study the behavior of the reliability function and the upper and lower error probability bounds numerically.by Desmond S. Lun.S.M

Foci of Schistosomiasis mekongi, Northern Cambodia: II. Distribution of infection and morbidity.

In the province of Kracheh, in Northern Cambodia, a baseline epidemiological survey on Schistosoma mekongi was conducted along the Mekong River between December 1994 and April 1995. The results of household surveys of highly affected villages of the East and the West bank of the river and of school surveys in 20 primary schools are presented. In household surveys 1396 people were examined. An overall prevalence of infection of 49.3% was detected by a single stool examination with the Kato-Katz technique. The overall intensity of infection was 118.2 eggs per gram of stool (epg). There was no difference between the population of the east and west shore of the Mekong for prevalence (P = 0.3) or intensity (P = 0.9) of infection. Severe morbidity was very frequent. Hepatomegaly of the left lobe was detected in 48.7% of the population. Splenomegaly was seen in 26.8% of the study participants. Visible diverted circulation was found in 7.2% of the population, and ascites in 0.1%. Significantly more hepatomegaly (P = 0.001), splenomegaly (P = 0. 001) and patients with diverted circulation (P = 0.001) were present on the west bank of the Mekong. The age group of 10-14 years was most affected. The prevalence of infection in this group was 71.8% and 71.9% in the population of the West and East of the Mekong, respectively. The intensity of infection was 172.4 and 194.2 epg on the West and the East bank, respectively. In the peak age group hepatomegaly reached a prevalence of 88.1% on the west and 82.8% on the east bank. In the 20 schools 2391 children aged 6-16 years were examined. The overall prevalence of infection was 40.0%, ranging from 7.7% to 72.9% per school. The overalls mean intensity of infection was 110.1 epg (range by school: 26.7-187.5 epg). Both prevalence (P = 0.001) and intensity of infection (P = 0.001) were significantly higher in schools on the east side of the Mekong. Hepatomegaly (55.2%), splenomegaly (23.6%), diverted circulation (4. 1%), ascites (0.5%), reported blood (26.7%) and mucus (24.3%) were very frequent. Hepatomegaly (P = 0.001), splenomegaly (P = 0.001), diverted circulation (P = 0.001) and blood in stool (P = 0.001) were significantly more frequent in schools of the east side of the Mekong. Boys suffered more frequently from splenomegaly (P = 0.05), ascites (P = 0.05) and bloody stools (P = 0.004) than girls. No difference in sex was found for the prevalence and intensity of infection and prevalence of hepatomegaly. On the school level prevalence and intensity of infection were highly associated (r = 0. 93, P = 0.0001). The intensity of infection was significantly associated only with the prevalence of hepatomegaly (r = 0.44, P = 0. 05) and blood in stool (r = 0.40, P = 0.02). This comprehensive epidemiological study documents for the first time the public health importance of schistosomiasis mekongi in the Province of Kracheh, Northern Cambodia and points at key epidemiological features of this schistosome species, in particular the high level of morbidity associated with infection

A bioassay for the detection of benzimidazoles reveals their presence in a range of environmental samples.

Cobamides are a family of enzyme cofactors that include vitamin B12 (cobalamin) and are produced solely by prokaryotes. Structural variability in the lower axial ligand has been observed in cobamides produced by diverse organisms. Of the three classes of lower ligands, the benzimidazoles are uniquely found in cobamides, whereas the purine and phenolic bases have additional biological functions. Many organisms acquire cobamides by salvaging and remodeling cobamides or their precursors from the environment. These processes require free benzimidazoles for incorporation as lower ligands, though the presence of benzimidazoles in the environment has not been previously investigated. Here, we report a new purification method and bioassay to measure the total free benzimidazole content of samples from microbial communities and laboratory media components. The bioassay relies on the "calcofluor-bright" phenotype of a bluB mutant of the model cobalamin-producing bacterium Sinorhizobium meliloti. The concentrations of individual benzimidazoles in these samples were measured by liquid chromatography-tandem mass spectrometry. Several benzimidazoles were detected in subpicomolar to subnanomolar concentrations in host-associated and environmental samples. In addition, benzimidazoles were found to be common contaminants of laboratory media components. These results suggest that benzimidazoles present in the environment and in laboratory media have the potential to influence microbial metabolic activities

The association between sleep patterns and obesity in older adults.

BackgroundReduced sleep duration has been increasingly reported to predict obesity. However, timing and regularity of sleep may also be important. In this study, the cross-sectional association between objectively measured sleep patterns and obesity was assessed in two large cohorts of older individuals.MethodsWrist actigraphy was performed in 3053 men (mean age: 76.4 years) participating in the Osteoporotic Fractures in Men Study and 2985 women (mean age: 83.5 years) participating in the Study of Osteoporotic Fractures. Timing and regularity of sleep patterns were assessed across nights, as well as daytime napping.ResultsGreater night-to-night variability in sleep duration and daytime napping were associated with obesity independent of mean nocturnal sleep duration in both men and women. Each 1 h increase in the standard deviation of nocturnal sleep duration increased the odds of obesity 1.63-fold (95% confidence interval: 1.31-2.02) among men and 1.22-fold (95% confidence interval: 1.01-1.47) among women. Each 1 h increase in napping increased the odds of obesity 1.23-fold (95% confidence interval: 1.12-1.37) in men and 1.29-fold (95% confidence interval: 1.17-1.41) in women. In contrast, associations between later sleep timing and night-to-night variability in sleep timing with obesity were less consistent.ConclusionsIn both older men and women, variability in nightly sleep duration and daytime napping were associated with obesity, independent of mean sleep duration. These findings suggest that characteristics of sleep beyond mean sleep duration may have a role in weight homeostasis, highlighting the complex relationship between sleep and metabolism

Student Perceptions of Problem Topics/Concepts in a Traditional Veterinary Embryology

Even though particular attention is paid to the nature and content of anatomy curricula, little has been published about the actual problem topics/concepts experienced by students of anatomy. This information is relevant to modifying existing courses and methods of teaching. The present study thus sought to identify, by means of a questionnaire administered to students of veterinary anatomy, perceived problem topics, the possible reasons for the problems, as well as student suggestions for solving the problems. A wide range of problem topics were identified by this survey, of which the development of heart and cardiovascular system, development of face/head, foetal membrane/placentation particularly 3 D pictures and then the development of body form and urogenital (including external genitalia) recurred most frequently. A major reason given for the problems experienced was an inability to conceptualise 3-dimensional structures. Students requested more time, more lectures and appealed for a reduction in detail of textual information. Many of the problems experienced by this group of students are reflected in other studies of veterinary, medical and dental students, which suggests the existence of ‘universal’ problem topics in the various fields of anatomy. We believe that these universal problem topics exist in many anatomy courses, despite the application of innovative teaching methods and advanced audio-visual technologies. Only by identifying these topics can suitable strategies (within the constraints of the particular curriculum) be devised to resolve them.Keywords: Anatomy, Embryology, Histology, Problem Topics/Concepts, Student Perceptions

Analysis Cracking Corrosion on Carbon Steel Pipes API 5L-X65 in Solution 7700 Ml Aquades, 250 Ml Acetic Acid and 50 Ml Ammonia with Gas CO2 and H2S in Saturation Condition

The oil and gas industry exploration that will generally be followed by corrosive substances including sweet gas (eg H2S and CO2), it will result in corrosion event. The corrosion stress cracking will cause the carbon steel pipe to break so that production oil and gas can be stopped. The research aims in this paper is to analyze the corrosion event of carbon steel pipe in laboratory scale on acid environment with the existence of sweet gas H2O and CO2 by using three points loading method. This research uses carbon steel pipe API 5L-X65 which stay in condensation environment of 7700 ml aquades, 250 ml acetic acid and 50 ml ammonia, then filled sweet gas CO2 and H2S in saturated state. Based on the test results of microstructure and microscope polarized, there is a phenomenon corrosion stress cracking, i.e transgranular stress cracking corrosion and intergranular stress cracking corrosion. The accelerate corrosion that happened at the test sample will be greater if ever greater given deflection for the time of the same presentation. Crack deepness in the test of the test sample will deeper if ever greater given deflection. The cracks in the sample test will deeper if it was given stress σ greater for the same exposure time

GPU-based Iterative Cone Beam CT Reconstruction Using Tight Frame Regularization

X-ray imaging dose from serial cone-beam CT (CBCT) scans raises a clinical concern in most image guided radiation therapy procedures. It is the goal of this paper to develop a fast GPU-based algorithm to reconstruct high quality CBCT images from undersampled and noisy projection data so as to lower the imaging dose. For this purpose, we have developed an iterative tight frame (TF) based CBCT reconstruction algorithm. A condition that a real CBCT image has a sparse representation under a TF basis is imposed in the iteration process as regularization to the solution. To speed up the computation, a multi-grid method is employed. Our GPU implementation has achieved high computational efficiency and a CBCT image of resolution 512\times512\times70 can be reconstructed in ~5 min. We have tested our algorithm on a digital NCAT phantom and a physical Catphan phantom. It is found that our TF-based algorithm is able to reconstrct CBCT in the context of undersampling and low mAs levels. We have also quantitatively analyzed the reconstructed CBCT image quality in terms of modulation-transfer-function and contrast-to-noise ratio under various scanning conditions. The results confirm the high CBCT image quality obtained from our TF algorithm. Moreover, our algorithm has also been validated in a real clinical context using a head-and-neck patient case. Comparisons of the developed TF algorithm and the current state-of-the-art TV algorithm have also been made in various cases studied in terms of reconstructed image quality and computation efficiency.Comment: 24 pages, 8 figures, accepted by Phys. Med. Bio

A GPU-based finite-size pencil beam algorithm with 3D-density correction for radiotherapy dose calculation

Targeting at the development of an accurate and efficient dose calculation engine for online adaptive radiotherapy, we have implemented a finite size pencil beam (FSPB) algorithm with a 3D-density correction method on GPU. This new GPU-based dose engine is built on our previously published ultrafast FSPB computational framework [Gu et al. Phys. Med. Biol. 54 6287-97, 2009]. Dosimetric evaluations against Monte Carlo dose calculations are conducted on 10 IMRT treatment plans (5 head-and-neck cases and 5 lung cases). For all cases, there is improvement with the 3D-density correction over the conventional FSPB algorithm and for most cases the improvement is significant. Regarding the efficiency, because of the appropriate arrangement of memory access and the usage of GPU intrinsic functions, the dose calculation for an IMRT plan can be accomplished well within 1 second (except for one case) with this new GPU-based FSPB algorithm. Compared to the previous GPU-based FSPB algorithm without 3D-density correction, this new algorithm, though slightly sacrificing the computational efficiency (~5-15% lower), has significantly improved the dose calculation accuracy, making it more suitable for online IMRT replanning

Effect of long-term fluorination on surface electrical performance of ethylene propylene rubber

To investigate the effect of fluorination on surface electrical performance of ethylene propylene rubber (EPR), four pieces of EPR specimens are prepared and fluorinated for different duration ranging from 120 min to 480 min. The surface morphology and element compositions of experimental specimens are tested. The surface potential decay and complex permittivity are measured. The tracking discharge property and the erosion properties after tracking test are investigated. The surface charge transport and electrical property tailoring mechanism are discussed. The results show that when the fluorination duration is from 120 min to 360 min, the surface morphology gradually becomes flat and compact with time, and the surface resistance to electrical tracking is improved. While an excessive fluorination with the duration of 480 min leads to a significant increase in surface conductivity and a weakening in the resistance to electrical tracking, which is mainly due to a change in surface morphology. The recommended fluorination duration for an optimised surface property is between 240 and 360 min for EPR specimen